iPhone stuck in boot loop after update? Here’s the fix

Introduction

The iPhone stuck in boot loop is one of the most occurred issues users face daily. This basically means an unsuccessful start-up process when you restart your device. In simple words, your iPhone keeps restarting and ends in that loop. If you have also encountered the same issue, there is no need to get worried or panic.

There might be various reasons for it. People can often identify the causes and resolve them, but not all people easily identify the causes. If you are one of them, don’t worry, you have come to the right place. Here, you will understand the iPhone’s boot loop causes and get the solution to resolve the issue.

Part 1: Why does iPhone stuck in boot loop?

  • Bad Software Update:

A bad software update is one of the common reasons your iPhone is stuck in the boot loop. It occurs when the process of iOS updating gets interrupted for any reason.

An inactive internet connection is also a major cause of the interruption. Hence, while you update your device, be sure to do it when you have a stable internet connection.

  • Jailbroken Device:

After being jailbroken, any Apple device becomes vulnerable to malware attacks. As a result, if your smartphone is jailbroken, you are more likely to encounter this problem. And this calls for an immediate need for iOS system recovery.

It is a particular set of disadvantages and if it is not done perfectly, then maybe you face issues with your iPhone and it will cause a problem with simple tasks.

  • Hardware Issues:

Hardware glitches are the leading causes of the boot loop. A loose charging connection or any broken components can cause hardware issues. In this case, it’s essential to give your device to Apple Care as soon as possible.

Part 2: How to fix iPhone stuck in boot loop

After getting knowledge on the reasons, let us now move forward on the actions that need to be taken.

Solution 1: Fix iPhone stuck in boot loop issue via Force Restart

The initial step of troubleshooting your device is to force restart your device. The following mentioned steps should be performed for this:

If you have an iPhone model such as 8, X, 11, 12/13, or the 2nd generation of iPhone SE, you have to press the “Volume Up” button and instantly release the button. Now, press the “Volume Down” button. Release the button. At last, you need to press the “Power” button until the Apple logo comes onto the screen.

For iPhone model 7/7 plus, press the “Volume Down” button and “Sleep/Wake” button together until you see the Apple logo on the screen.

For the earlier model, start pressing the “Sleep/Wake” button and at the same time, you have to press the “Home” button. Wait for the apple logo and once you see the logo on your screen, then release the buttons.

Solution 2: Fix iPhone boot loop without data loss

When iPhone stuck in boot loop, most users think they will lose their data, but it is better to get help from a 3rd party tool to resolve this issue effectively. Compared to other devices or methods that can fix your iOS system problem, Dr.Fone – System Repair (iOS) will efficiently resolve this issue without losing any data.

Dr.Fone is a complete solution for mobile devices covering iOS and Android devices. Its System Repair will solve any iOS device issues like being stuck on the Apple logo, boot loop, black/white screen of death, etc. With the help of a few clicks, you can resolve the issue, and everything will get complete within a few minutes.

Here is how to use the standard mode to fix the iOS system issues:

Step 1 – Begin with downloading and installing Dr.Fone on your PC. Launch it and then, from the page that appears, go to “System Repair.”

Step 2 – Now, connect your device with its lighting cable. The System Repair software notices your iDevice, and you will see two options i.e. “Standard Mode” and “Advanced Mode”. Select the former one.

Step 3 – Then, the model type of your device will be automatically detected and the available iOS systems versions will be shown. Then pick out a version and press the “Start” button to move forward.

Step 4 – Then, after some time, the suitable firmware will get downloaded. Ensure that your internet is stable at the time of downloading.

Step 5 – After the firmware is downloaded, the tool authenticates the downloaded firmware.

Step 6 – On the next screen where the iOS firmware is verified, hit on “Fix now” so that the tool begins to repair your iOS.

Step 7 – Within a few minutes, the iPhone will be fixed successfully without any issue. You can now access your device with ease.

Solution 3: Fix iPhone stuck in boot loop using iTunes

With the assistance of iTunes, you can break the iPhone boot loop and restore the device. Even if you set your device on the DFU (Device Firmware Update) mode, you can use this method. Make sure that your iTunes version is the latest.

Step 1 – Connect your device to your system with the lightning cable.

Step 2 – In a few seconds, iTunes will identify the issue with your device and show the following message. Here you need to click on the “Restore” button to resolve it.

Step 3 – If you don’t get this message, can manually restore your phone.

Step 4 – Now click on the “Summary” tab.

Step 5 – Then go ahead with the “Restore iPhone” option.

Step 6 – Wait for a few minutes while iTunes will restore your device.

These are the various steps of iPhone models to follow when your iPhone is stuck in the boot loop.

Final Words

Now that’s the end of the topic. You can make use of all the methods explained above to get your iPhone out of the boot loop. After attempting the solutions provided above, you will undoubtedly restore your iPhone. And if you have tried some of them and the problem is still a mystery, don’t be afraid to use the dedicated tool that is Dr.Fone.

Related Articles

Leave a Reply

Back to top button